A1 Techno Classes

Ethan Brooks Ethan Brooks

0 Course Enrolled • 0 Course Completed

Biography

Valid 800-150 Exam Forum | 800-150 Exam

P.S. Free 2026 Cisco 800-150 dumps are available on Google Drive shared by TestPDF: https://drive.google.com/open?id=15GBSeViT8LkeiwXrWSEUcXZZKhN9gw10

TestPDF is a website that not the same as other competitor, because it provide all candidates with valuable 800-150 exam questions, aiming to help them who meet difficult in pass the 800-150 exam. Not only does it not provide poor quality 800-150 Exam Materials like some websites, it does not have the same high price as some websites. If you would like to try 800-150 learning braindumps from our website, it must be the most effective investment for your money.

Cisco 800-150 Exam Syllabus Topics:

Topic
Details

Topic 1

Cisco Infrastructure and Collaboration Infrastructure: This section of the exam measures the skills of a Collaboration Engineer and focuses on Cisco infrastructure devices, endpoints, and collaboration technologies. It introduces network devices, collaboration endpoints like IP phones and video systems, and explains on-premises collaboration deployments using tools like Cisco Unified Communications Manager. It also covers how video systems integrate into collaboration environments and highlights Cisco’s cloud services for enterprise communication, including Webex Meetings, Webex Teams, and hosted collaboration solutions.

Topic 2

Common Service Tasks and Tools: This section of the exam measures the skills of a Technical Support Engineer and focuses on tasks commonly needed to manage Cisco devices. It explains how devices boot up, introduces common Cisco IOS commands, and identifies tools for file management. It shows how to confirm physical connections, remotely access devices, and connect to the console port. It also covers how to capture the status of a device, recover passwords, and replace devices by using proper tools. Students are also taught how to find serial numbers on Cisco equipment to assist with support and maintenance activities.

Topic 3

Cisco Software: This section of the exam measures the skills of a Network Engineer and discusses Cisco’s software systems and licensing. It explains the difference between IOS install and bundle modes and gives an overview of different licensing models. Students learn how to manage Cisco software images, including backing up, transferring, and installing images via FTP, TFTP, or USB. It also covers how to handle configuration files to keep devices running properly and ensure smooth upgrades or replacements.

>> Valid 800-150 Exam Forum <<

Realistic Valid 800-150 Exam Forum & Leader in Qualification Exams & Top 800-150 Exam

As is known to us, the quality is an essential standard for a lot of people consuming movements, and the high quality of the 800-150 guide questions is always reflected in the efficiency. We are glad to tell you that the 800-150 actual guide materials from our company have a high quality and efficiency. If you decide to choose 800-150 actual guide materials as you first study tool, it will be very possible for you to pass the 800-150 exam successfully, and then you will get the related certification in a short time.

Cisco Supporting Cisco Devices for Field Technicians Sample Questions (Q59-Q64):

NEW QUESTION # 59
Which two network design strategies in Cisco data center solutions improve fault tolerance and high availability? (Choose two.)

A. Access layer switch deployment
B. Virtual port channels for link aggregation
C. SAN extension over IP networks (FCIP)
D. Redundant supervisor engines and fabric modules
E. High-density 10/40/100 gigabit Ethernet connectivity

Answer: B,D

Explanation:
To ensurehigh availability and fault tolerancein Cisco data center designs, two effective strategies include:
* Redundant Supervisor Engines and Fabric Modules: These provide failover capabilities, so if one supervisor or fabric module fails, another can take over, maintaining network operations without interruption.
* Virtual Port Channels (vPCs): vPCs allow connections to be made to two physical switches while appearing as one logical switch. This prevents loops and adds redundancy and load balancing, which is critical in high-availability environments.
Other options may enhance performance (e.g., high-density Ethernet) or extend functionality (e.g., FCIP), but do not directly contribute to fault tolerance and high availability in the same way.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Cisco Equipment and Related Hardware

NEW QUESTION # 60
Drag and drop the network connectivity and management tools used to ensure connectivity from the left onto the description on the right.

Answer:

Explanation:

Explanation:
* PING# Sends ICMP echo request packets to verify connectivity
* Telnet# Allows virtual terminal connections with unencrypted traffic
* SSH# Provides secure, encrypted remote access to network devices
* IP address configuration# Requires the PC and Cisco device to be in the same subnet for direct connection These tools and their functions are covered under"Device Configuration and Verification"in the FLDTEC course:
PING:Utilized to test basic networkconnectivity using ICMP echo request/reply messages. It confirms whether a device is reachable and measures the round-trip time.
Telnet:A protocol that allows for remote device access but transmits data in plaintext, which makes it insecure. It's typically disabled by default on modern Cisco devices due to security concerns.
SSH (Secure Shell):Replaces Telnet as the preferred method for secure CLI access. It encrypts the session, protecting sensitive information such as login credentials.
IP Address Configuration:For direct device access via the same local network, both the PC and the Cisco device must be in the same subnet. This allows the use of tools like browser-based GUIs or terminal emulators when connecting directly.

NEW QUESTION # 61
Which two results are achieved by briefly pressing the restore/reset button on a Cisco Meraki switch? (Choose two.)

A. A full factory restore is performed.
B. Cloud management is disabled.
C. The management interface is cleared.
D. The device reboots.
E. The downloaded configuration is deleted.

Answer: C,D

Explanation:
On aCisco Meraki switch, briefly pressing therestore/reset button(typically less than 5 seconds) triggers:
* A reboot of the device(Option A)
* Clearing of the local management interface settings(Option D), which may include temporary network information such as DHCP leases or local overrides.
To perform a full factory reset (Option B), the button must be held down for a longer duration, usuallymore than 10seconds. Options C and E do not reflect standard reset behavior.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Maintenance and RMA Procedures

NEW QUESTION # 62
What must be considered when installing a new fan module in a fixed-configuration Cisco Nexus switch?

A. The fan module must be from the same manufacturing batch as the others.
B. The size of the fan module must match the power supply.
C. Fan modules can be installed only when the switch is powered off
D. The airflow direction must be consistent with other installed modules.

Answer: D

Explanation:
When installing a fan module in a Cisco Nexus fixed-configuration switch, it's crucial to ensure that the airflowdirection of the new fan matches the existing airflow configuration. Mismatched airflow directions can lead to inefficient cooling or even overheating of components, potentially affecting the performance or lifespan of the switch.
Cisco offers fan modules infront-to-backorback-to-frontairflow variants, and consistency is required for proper thermal management. These modules are also typically hot-swappable, meaning powering down the switch is not necessary.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Maintenance and RMA Procedures

NEW QUESTION # 63
Which step must be performed immediately after powering off the device when replacing a Cisco chassis?

A. Back up the device configuration.
B. Remove the chassis ground.
C. Label and remove all I/O cables.
D. Remove the chassis.

Answer: C

Explanation:
After powering off a Cisco device in preparation for chassis replacement, theimmediate next stepis tolabel and remove all I/O cables. This step is crucial to ensure that all connections can be accurately restored after the new chassis is installed.
Proper labeling prevents confusion and potential misconfigurations during reassembly. Only after all cables are safely disconnected should you proceed to remove the chassis ground and then the chassis itself.
Reference:Supporting Cisco Devices for Field Technicians (FLDTEC) - Maintenance and RMA Procedures

NEW QUESTION # 64
......

The learning material is open in three excellent formats; Cisco 800-150 dumps PDF, a desktop Cisco 800-150 dumps practice test, and a web-based Cisco 800-150 dumps practice test. Cisco 800-150 dumps is organized by experts while saving the furthest down-the-line plan to them for the Cisco 800-150 Exam. The sans bug plans have been given to you all to drift through the Supporting Cisco Devices for Field Technicians certificate exam.

800-150 Exam: https://www.testpdf.com/800-150-exam-braindumps.html

BONUS!!! Download part of TestPDF 800-150 dumps for free: https://drive.google.com/open?id=15GBSeViT8LkeiwXrWSEUcXZZKhN9gw10

Call us :+91 81076 79957, 6378181856, 9783123777

Email: info@a1technoclasses.com

Technical

Non-Technical

Internships

Technical

Non-Technical

Internships

Technical

Non-Technical

Internships

Ethan Brooks Ethan Brooks

Biography

Elevate Your Future with A1 Techno Classes

Follow Us On

Important Links

Courses

Contact Us